ShellSol® A150 – High-Boiling Aromatic Hydrocarbon Solvent for Industrial Applications
Introduction
ShellSol® A150 is a high-boiling aromatic hydrocarbon solvent supplied by Shell Chemicals. It is a C9–C10 aromatic solvent grade valued for its strong solvency, relatively slow evaporation rate, and high flash point compared with many faster-evaporating solvents. It is used in industrial formulations that require effective dissolution of compatible resins, oils, and other organic materials. Its properties make it suitable for selected paints, coatings, printing inks, and specialty chemical applications. <Cite refs={["turn657835search12","turn657835search0"]}/>
Industrial Applications
ShellSol® A150 is used in paints and protective coatings where strong solvency and controlled evaporation are important for formulation performance. It can serve as a solvent in selected industrial coatings, including certain wood and furniture coating systems, depending on resin compatibility and product requirements.
It is also used in printing inks, adhesives, and selected industrial formulations that require an aromatic hydrocarbon solvent. In agricultural chemical formulations, it may act as a solvent or carrier where permitted and technically suitable. Application suitability depends on the specific formulation, applicable regulations, and the manufacturer’s recommendations. <Cite refs={["turn657835search0","turn657835search3","turn657835search16"]}/>
Key Benefits
ShellSol® A150 offers high solvency for compatible organic materials and a relatively slow evaporation profile. Its high boiling range can help formulators manage drying characteristics and application performance in suitable systems. It is available as a specialized industrial solvent grade, with technical properties documented by the supplier. The appropriate solvent selection should consider compatibility, drying requirements, worker exposure, and environmental regulations. <Cite refs={["turn657835search12","turn657835search14"]}/>
Product Specifications
| Parameter | Typical Specification |
|---|---|
| Product Name | ShellSol® A150 |
| Product Type | Aromatic hydrocarbon solvent |
| CAS Number | 64742-94-5 |
| Composition | Primarily C9–C10 aromatic hydrocarbons; regional grade may vary |
| Appearance | Clear liquid |
| Density at 15°C | Approximately 0.887–0.900 kg/L, depending on regional grade |
| Initial Boiling Point | Approximately 178–188°C, depending on regional grade |
| Dry Point / Final Boiling Range | Approximately 198–220°C, depending on regional grade |
| Relative Evaporation Rate | Slow; approximately 0.05–0.06, with n-butyl acetate = 1 |
| Flash Point | Approximately 64–65°C, depending on grade and test method |
| Main Applications | Paints, coatings, printing inks, and specialty formulations |
| Packaging | Supplier- and distributor-dependent |
| Storage | Store in approved, tightly closed containers in a suitable ventilated area |
Note: Values are representative of published regional technical data sheets and are not a guaranteed sales specification. Confirm the current technical data sheet for the exact product and supply region before ordering. <Cite refs={["turn657835search12","turn657835search14","turn657835search16"]}/>
Storage and Handling
ShellSol® A150 is a combustible industrial solvent. Use it only with appropriate ventilation and keep it away from heat, sparks, open flames, and other ignition sources. Avoid breathing vapours or mist and prevent contact with skin and eyes. Use suitable chemical-resistant gloves, eye protection, and other personal protective equipment specified in the Safety Data Sheet (SDS). Store in compatible, tightly closed containers in a designated area, following local requirements for flammable or combustible liquids. Prevent spills from reaching drains and waterways. <Cite refs={["turn657835search9","turn657835search14"]}/>
Quality and Supply
ShellSol® A150 specifications may differ by region and product revision. Before purchase, buyers should confirm density, distillation range, flash point, aromatic content, relevant impurity limits, packaging, and the latest technical and safety documentation. Verify compatibility with the intended resin or formulation and check applicable occupational, environmental, and transport requirements.
Conclusion
ShellSol® A150 is a high-boiling aromatic solvent designed for industrial applications requiring strong solvency and relatively slow evaporation. It is used in selected coatings, printing inks, and specialty formulations. Reviewing the current regional technical data sheet and SDS helps ensure appropriate product selection, safe handling, and reliable application performance.
